Leadshine 3DM580S Digital Stepper Driver 3-Phase 0.5-8.0A 20-74VDC for Nema 17, Nema 23, Nema 24, Nema 34 Stepper Motor

Leadshine 3DM580S Digital Stepper Driver 3-Phase 0.5-8.0A 20-74VDC for Nema 17, Nema 23, Nema 24, Nema 34 Stepper Motor

Suitable for a wide range of Stepper motors, from NEMA frame size 17 to 34. It can be used in various kinds of machines, such as laser cutters, laser markers, labeling machines, and so on. 

Key Features:

Step & direction (PUL/DIR) or CW/CCW (double pulse) control

Suggested supply voltage 20-50 VDC, up to 74VDC

500KHz max pulse input frequency in duty cycle 50%

8 micro-step resolutions of 200-10,000 via DIP switches, or 200-51,200 via software (increase by 100)

16 output current settings of 2.1 -8.0A via DIP Switches, or 0.5-8.0A via software (increase by 0.1)

Configurable control command smoothing for reducing motor vibration

Idle current reduction to 50% or 90% selection via SW5

Convenient self-test for easy diagnosis

Two motion modes of low-speed smooth and high-speed large torque

Anti-Resonance for suitable torque, extra smooth motion, low motor heating and noise

Soft-start with no “jump” when powered on

Fault output

Over-voltage, over-current protections

CE certified and RoHS compliant

Electrical Specifications:

Output Current: 0.5~8.0A (5.7 RMS)

Input Voltage: +20~74VDC (Typical 24 - 48VDC)

Logic Signal Current: 7~16mA (Typical 10mA)

Pulse Input Frequency: 0~500kHz

Minimal Pulse Width: 1μS

Isolation Resistance: 500MΩ

Operating Environment and other Specifications(Tj = 25℃/77℉):

Cooling: Natural Cooling or Forced cooling

Environment: Avoid dust, oil fog and corrosive gases

Ambient Temperature: 0℃ － 65℃

Humidity: 40%RH－90%RH

Operating Temperature: 0℃ － 50℃

Vibration: 10-55Hz / 0.15mm

Storage Temperature: -20℃ － 65℃

Weight: Approx.250g(8.8oz)

Resources

Driver Manual:3DM580S.pdf